Description
PC 109 Fleet Degreaser is a powerful concentrate designed to clean and degrease most surfaces. This product will remove road film, carbon stack stain, grease, and oil. It will work best in hot water, and rinse free at any temperature. For use in hot pressure washers, apply to the surface up to the rate of 1 part cleaner to 50 parts water in a ready to use solution. This versatile cleaner has multi uses depending on dilution. 1 drum makes 4. It is designed for heavy duty cleaning such as drive through truck washes. It works in cold water as well as hot water, and rinses free at any temperature.
Directions
Low or high pressure works as well as through a drive-through arch. High pressure application will give faster performance at generally higher dilutions. While this product works well with cold water, it can be enhanced with the use of heat. Water softeners are built in and are to be used to the greatest advantage if premixed at high dilutions before application. A pressure rinse is recommended because of the water saving characteristics of this method. FIRST DILUTION: 1 part PC-109 to 4 parts water Then: 1 to 20 Low Pressure Brushless 1 to 30 High Pressure Brushless Hard Surface 1 to 100 Brush & New Car Cleanup 1 to 8 Whitewall Tires with Brushes 1 to 3 Whitewall Tires without Brushes
Note: Product falls under Hazardous Material Category. Additional $35 UPS hazmat fee will apply. Truck shipments do not apply. This product is not offered in 1-gallon sizes; the image is for demonstration purposes only.
