Description
Mineral Oil-Based Concrete Release Agent
- Improves release of formwork
- Reduces concrete buildup on formwork and liners
- Reduces cleaning of formwork
- Leaves no residue, stain or discoloration
- Mineral oil base
- Non-evaporative, long-lasting formula
Easy Crete Relesase is a chemically reactive, mineral oil-based, concrete release agent specially engineered to prevent bonding of concrete to forms and form liners. Easy Crete Release contains no waxes or silicones.
Directions:
DO NOT DILUTE. EASY CRETE RELEASE is formulated ready-to-use. Form surfaces should be clean of dirt, rust, scale and concrete buildup prior to application. This product should be applied using an atomizing or misting spray tip so that application may be in a thin uniform film to maximize product performance and economy. Over-application will not produce better results and may cause dusting. Excess material or puddles should be removed with a squeegee and absorbent rags. When properly applied, EASY CRETE RELEASE will not leave any residue or stain on the concrete, producing a smooth, architectural concrete surface ready for subsequent coatings. Coating manufacturer’s recommendations for surface preparations must be followed.
NOTE: This product is not offered in 1-gallon sizes; the image is for demonstration purposes only.
