Description
Aluminum Wheel Cleaner & Brightener is specifically formulated for aluminum wheels. Do not use on othersurfaces. If splashed on glass, wash off immediately.
Directions
May dilute with water before using. Mix solution in a plastic or stainless steel bucket or sprayer. Make up only enough solution for the job at hand. For most wheels- Under average conditions of temperatures (55-85°F) and relative humidity (50%), a solution of 1 part concentrate diluted with 3 part water will give good results. Since lower temperatures slow cleaning action use a stronger solution on cool days. Note: Working in hot direct sun may cause streaking. Wet down wheels to cool surface before applying. Whenever possible, it is better to work in the shade. To Apply: Always work from the bottom up to avoid streaking and also work only small areas so surface does not dry before rinsing. Spray product after solution has set for about 15 seconds; flush thoroughly with water, being sure to rinse also adjacent concrete ramps, floors, and drains. Do not run through pumping system or heating coils.
Note: Product falls under Hazardous Material Category. Additional $35 UPS hazmat fee will apply. Truck shipments do not apply. This product is not offered in 1-gallon sizes; the image is for demonstration purposes only.
