Description
XIM’s Peel Bond is a unique, high build, water-based, penetrating, bonding primer/sealer. It is formulated to bond-to and seal a wide range of construction materials. It can reduce the cracking and peeling or the top coat paint by remaining flexible over the life of the paint. It can help reduce the time spent on surface Preparation, however, it is not a complete substitute for all surface preparation and all surface conditions.
Features:
* Applies up to 30 mils wet Reduces labor and prep time Bonds to plywood, T1-11, PVC, aluminum and more Cures at temp as low as 40° F surface temp and cures at humidity up to 90% Interior / Exterior
Specifications:
Form: Liquid | Coverage: 50 - 200 sq-ft/gal | Application Method: Brush, Roller, Spray | Temperature Rating: 40 deg F Application | Warranty: Limited | Curing Time: 30 min to Touch, 40 - 60 min to Top Coat Under Normal Condition at 77 deg F and 50% Relative Humidity | Color: White | Type: Water Based | Applicable Materials: Wood, Plywood, Hardboard, Stucco, Brick, Aluminum, Galvanized Metal, Fiberglass, PVC Plastic and PVC Siding | Composition: N-Methyl-2-Pyrrolidinone, Propylene Glycol, Calcium Carbonate, Crystalline Silica, Anhydrous Aluminum Silicate, Magnesium Silicate Hydrate, Zinc Oxide | Nominal Capacity: 5 gal | VOC Content: <100 g/L | Viscosity: 130 - 140 Krebs Units | Odor/Scent: Sweet | Packing Type: Pail
Warnings:
Prop 65: WARNING WARNING: Cancer and Reproductive Harm - For more information, go to www.P65Warnings.ca.gov .