Description
Rust-Oleum V2100 System Enamel aerosols are available in high-gloss, semi-gloss, flat, metallic and fluorescent finishes. They apply easily and dry fast to a tough, attractive corrosion-resistant finish featuring superior coverage, color, and gloss retention and resist chipping, cracking and peeling. They are available in a variety of colors including safety and fluorescent colors, and many match popular Rust-Oleum Industrial Enamel gallon colors for easy touchups. Not for use on galvanized steel.
Features:
* Use to touch-up/repair galvanized ducts, storage tanks, etc
* in moderate to severe environments Dries fast—20 minutes to the touch; withstands heat to 200° F Performance offset to Federal Specifications DOD-P-21035A; MIL-P-26915C Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC-compliant nationwide For Best Results For large projects, apply using the High Performance Comfort Grip
Specifications:
Type: High Performance | Specific Gravity: 1.318 | Odor/Scent: Solvent | Application Method: Spray | Nominal Capacity: 20 oz | Finish: Flat | VOC Content: 610 g/L | Resists: Chip, Crack and Peel | Series: V2100 System | Color: Galvanizing | Temperature Rating: 50 - 90 deg F | Applicable Materials: Metal | Form: Liquid | Composition: Zinc, Toluene, Liquefied Petroleum Gas, Mineral Spirits, Stoddard Solvent, Ethylbenzene, Amorphous Silica | Packing Type: Aerosol Can | Curing Time: 10 - 20 min to Tack- Free, 1 - 2 hr to Handle, Within 1 hr or After 48 hr to Recoat | Flash Point: -156 deg F | Coverage: 14 sq-ft
Videos:
https://www.youtube.com/watch?v=H4mbEUb0szw
Warnings:
Prop 65: WARNING WARNING: Cancer - For more information, go to www.P65Warnings.ca.gov .
Videos
