Description
GacoFlex E5320 is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean. On asphalt-based surfaces it may help prevent bleed-through, and when top coated will help prevent corrosion. When mixed with ordinary sand, it’s a masonry block filler.
GacoFlex E5320 is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean. A general purpose primer which may also be used as a masonry block filler Good solvent, fair acid Cures to form a hard coating material Excellent adhesion to most surfaces Approximately 7 days at 60 deg F to 80 deg F is required to achieve maximum hardness Must be top-coated when used in exterior applications Application: Vitreous Surfaces
Brochure
Safety Data Sheet A
Safety Data Sheet B
Technical Data Sheet
GacoFlex E5320 is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean. A general purpose primer which may also be used as a masonry block filler Good solvent, fair acid Cures to form a hard coating material Excellent adhesion to most surfaces Approximately 7 days at 60 deg F to 80 deg F is required to achieve maximum hardness Must be top-coated when used in exterior applications Application: Vitreous Surfaces
Brochure
Safety Data Sheet A
Safety Data Sheet B
Technical Data Sheet
Extra Information
Weight:
25.00 LBS
Type:
Non-Flammable
Temperature Rating:
50 deg F
Coverage:
200-250 sq-ft/gal For Smooth Surface
Application Method:
Brush, Roller, Spray
Warranty:
50 Years Limited
Applicable Materials:
Metal, Wood and Masonry
Curing Time:
2 hr to First Coat, 6 hr to Before Top Coat
Flash Point:
>200 deg F
Resists:
Alkali and Solvent
Nominal Capacity:
2 gal
VOC Content:
Color:
White
