Description
UMA Advanced Technology Brand Aerosol is a water-based bonding agent that has both primer and adhesive-like properties. It provides excellent adhesion to hard-to-paint surfaces even when wet. Advanced Technology UMA Brand Aerosol must be topcoated with latex, oil-based alkyds, lacquers, epoxies and urethanes. UMA Advanced Technology Brand contains XIM’s Flash Bond Technology, a water-based, nano particle technology, designed to provide excellent adhesion and hardness in a low VOC formula. It is a proprietary blend of adhesive polymers, surface penetrants, surface wetting agents and polymeric film hardeners. UMA Advanced Technology Brand is suitable for use on wood, metal, most plastics, fiberglass, Formica, tile porcelain, glazed block, and glass. It is also suitable for use on aluminum preceded by a solvent wipe. The UMA aerosol is NOT recommended for priming Kynar or silicone polyester siding or for below grade application. The UMA aerosol is not recommended for tubs, sinks or shower or on masonry where the pH (alkalinity) is high.
Accepts all topcoats Bonds / seals to hard-to-paint surfaces Excellent wet adhesion Low VOC, low odor Interior / Exterior
6 per case
Safety Data Sheet
Technical Data Sheet
Accepts all topcoats Bonds / seals to hard-to-paint surfaces Excellent wet adhesion Low VOC, low odor Interior / Exterior
6 per case
Safety Data Sheet
Technical Data Sheet