Description
Resists temperatures up to 500 degrees. Durable high-gloss formulation. Resists oil, gas, grease, rust, salt, humidity, and solvents. Rust-preventive formula. Any-angle-spray technology, with a comfort-tip nozzle.Rust-Oleum® 248944 Engine Enamel, 11 oz Aerosol Can, Clear, 10 - 12 sq-ft Coverage, -156 deg F Flash
Brighten and customize your engine with RustOleum® Automotive Engine Enamel. This durable coating creates a smooth, high gloss finish that withstands intermittent high heat and resists oil, gas, grease, rust, salt, humidity and solvents. Resists heat up to 500 deg F Rust-preventive formula Any-angle-spray technology, with a comfort-tip nozzle Standard/Approvals: Canadian WHMIS Class And U.S. Federal Regulations
6 per case
Data Sheet
MSDS
Brighten and customize your engine with RustOleum® Automotive Engine Enamel. This durable coating creates a smooth, high gloss finish that withstands intermittent high heat and resists oil, gas, grease, rust, salt, humidity and solvents. Resists heat up to 500 deg F Rust-preventive formula Any-angle-spray technology, with a comfort-tip nozzle Standard/Approvals: Canadian WHMIS Class And U.S. Federal Regulations
6 per case
Data Sheet
MSDS
Extra Information
Weight:
1.11 LBS
Nominal Capacity:
11 oz
Color:
Clear
Flash Point:
-156 deg F
Form:
Liquid
Resists:
Oil, Grease, Gas, Rust, Salt, Humidity and Solvent
Specific Gravity:
0.731
Composition:
Acetone, Liquefied Petroleum Gas, Naphtha, Petroleum, Hydrotreated Light, Toluene
Application Method:
Spray
Coverage:
10 - 12 sq-ft
Curing Time:
20 min to Touch, 1 hr to Handle, Within 1 hr or After 48 hr to Recoat, 7 day to Full Cure at 70 deg F and 50% Relative Humidity
Applicable Materials:
Metal
VOC Content:
573 g/L
Packing Type:
Aerosol Can
Temperature Rating:
50 - 90 deg F
Odor/Scent:
Solvent
