Description
Zinsser Mold Killing Primer is a water based fungicidal protective coating that can be used to paint over all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms. The Mold Killing Primer contains an EPA registered antimicrobial to prevent the growth of mold, mildew and other fungal organisms on the paint film. The Mold Killing Primer also aides in covering residual microbiological and fungal stains.
Paint directly over mold Kills existing mold, mildew, and odor causing bacteria Binds chalky siding, masonry, and metal EPA Registered Interior / Exterior Water-based For stains caused by water leaks, allow Mold Killing Primer to dry then use a Zinsser stain blocking primer
4 per case
Material Safety Data Sheet
Paint directly over mold Kills existing mold, mildew, and odor causing bacteria Binds chalky siding, masonry, and metal EPA Registered Interior / Exterior Water-based For stains caused by water leaks, allow Mold Killing Primer to dry then use a Zinsser stain blocking primer
4 per case
Material Safety Data Sheet
Extra Information
Weight:
3.00 LBS
Odor/Scent:
Mild
Curing Time:
30 min to Touch, 2 hr to Recoat at 70 deg F and 50% Relative Humidity
Nominal Capacity:
1 qt
Color:
White
Flash Point:
>200 deg F
VOC Content:
Coverage:
400 - 450 sq-ft/gal
Specific Gravity:
1.41
Application Method:
Airless Spray, Brush, Roller
Form:
Liquid
Type:
Water Based
Composition:
Titanium Dioxide, Amorphous Silica
