Description
Fast-drying, solvent-based bonder, primer and sealer. Excellent sealing and adhesion to many hard to coat surfaces including wood, ferrous and non-ferrous metals, plaster, Formica, some plastics, glass, tile and fiberglass. Covers 550 sq ft per gallon.XIM Bonder 400W Solvent Based Primer Bonder/Sealer, 1 qt Container, White, Gloss, 650 - 750 sq-ft/gal Coverage
400W and 400W ES White are ultra premium solvent based primer/sealer/bonders developed to meet Federal and State VOC requirements and solve many paint bonding problems They provide excellent adhesion, sealing and bonding on many hard-to-coat surfaces. Clean and dull paintable surfaces may not need sanding, but sanding or dulling the surface is required on hard, glossy surfaces for maximum adhesion. Both products can be used for both indoor or out-door applications and can be used with either oil/alkyd or latex topcoats. Not recommended under with strong solvent topcoats such as lacquers or two component epoxies or urethanes. 400W and 400W ES are recognized as the leading bonding primers for though-to-coat surfaces by major painting contractors Quick dry Ready to apply no thinning Helps bond paint primes and seals Top coats alkyds, latex Standard/Approvals: OSHA 29 CFR 1910.1200 Application: Interior/Exterior Use
4 per case
Technical Data Sheet
Material Safety Data Sheet
400W and 400W ES White are ultra premium solvent based primer/sealer/bonders developed to meet Federal and State VOC requirements and solve many paint bonding problems They provide excellent adhesion, sealing and bonding on many hard-to-coat surfaces. Clean and dull paintable surfaces may not need sanding, but sanding or dulling the surface is required on hard, glossy surfaces for maximum adhesion. Both products can be used for both indoor or out-door applications and can be used with either oil/alkyd or latex topcoats. Not recommended under with strong solvent topcoats such as lacquers or two component epoxies or urethanes. 400W and 400W ES are recognized as the leading bonding primers for though-to-coat surfaces by major painting contractors Quick dry Ready to apply no thinning Helps bond paint primes and seals Top coats alkyds, latex Standard/Approvals: OSHA 29 CFR 1910.1200 Application: Interior/Exterior Use
4 per case
Technical Data Sheet
Material Safety Data Sheet
Extra Information
Weight:
2.67 LBS
Flash Point:
55 deg F
Type:
Solvent Based
Odor/Scent:
Solvent
Packing Type:
Container
VOC Content:
Nominal Capacity:
1 qt
Temperature Rating:
50 - 90 deg F
Composition:
Benzene, Ethyl Benzene, Toluene, Xylene, VM&P Naphtha, Anhydrous Aluminum Silicate, Calcium Carbonate, Crystalline Silica, Magnesium Silicate Hydrate, Titanium Dioxide
Warranty:
Limited
Applicable Materials:
Aluminum, Steel, Iron, Chrome, Tin, Copper, Brass, Porcelain, PVC,Glass, Wood and Plywood
Application Method:
Brush, Roller, Spray
Form:
Liquid
Coverage:
650 - 750 sq-ft/gal
Finish:
Gloss
Viscosity:
30 +/- 4 Seconds: (No 2 Zahn Cup)
Color:
White
Curing Time:
20 - 30 to Touch, 2 - 3 hr to Recoat, 24 - 48 hr to Dry Hard, 7 - 14 day to Full Cure at 77 deg F and 50% Relative Humidity
