Description
For exotic hardwoods like teak, rosewood and mahogany. Even coverage, no brush marks. UV-resistance for indoor an outdoor use. Will notcrack, chip or peel. Excellent for marine use above the water line.Watco® Teak Oil Finish, 1 qt, 560 - 575 sq-ft/gal Coverage, 65 deg F Flash Point, Solvent Like Odor
Watco Teak Oil is specifically formulated to provide an Outstanding UV and moisture resistant finish for dense woods such as teak, rosewood or mahogany. Watco Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. Watco Teak Oil protects wood from within and will not chip, peel or wear away. Use to treat outdoor or indoor furniture and marine surfaces (above the water line) such as wood boat decks, cabinets and rails WATCO® Teak Oil is specifically formulated for dense woods such as teak, rosewood or mahogany WATCO® Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish It takes less than an hour to treat your wood with WATCO® Teak Oil - simply brush or wipe on and wipe off WATCO® Teak Oil is the choice of fine woodworkers and novices alike Outstanding UV and moisture resistant finish Great for marine use above the water line Easy application and maintenance Application: Wood Boat Decks, Cabinets and Rails
4 per case
Technical Data Sheet
Material Safety Data Sheet
Watco Teak Oil is specifically formulated to provide an Outstanding UV and moisture resistant finish for dense woods such as teak, rosewood or mahogany. Watco Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. Watco Teak Oil protects wood from within and will not chip, peel or wear away. Use to treat outdoor or indoor furniture and marine surfaces (above the water line) such as wood boat decks, cabinets and rails WATCO® Teak Oil is specifically formulated for dense woods such as teak, rosewood or mahogany WATCO® Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish It takes less than an hour to treat your wood with WATCO® Teak Oil - simply brush or wipe on and wipe off WATCO® Teak Oil is the choice of fine woodworkers and novices alike Outstanding UV and moisture resistant finish Great for marine use above the water line Easy application and maintenance Application: Wood Boat Decks, Cabinets and Rails
4 per case
Technical Data Sheet
Material Safety Data Sheet
Extra Information
Weight:
2.22 LBS
Additives:
Naphtha, Petroleum, Hydrotreated Light, Stoddard Solvent, Solvent Naphtha, Light Aromatic, Mineral Spirits
Applicable Materials:
Wood
Temperature Rating:
55 - 90 deg F Air and Surface
Resists:
UV and moisture
Flash Point:
65 deg F
Coverage:
560 - 575 sq-ft/gal
Color:
Clear
Curing Time:
8 hr to Tack Free, 10 hr to Handle, 30 min Recoat at 70 - 80 deg F and 50% Relative Humidity
Nominal Capacity:
1 qt
Odor/Scent:
Solvent Like
Form:
Liquid
Application Method:
Roller
VOC Content:
450 g/L
Specific Gravity:
0.862
