Description
Painter's Touch® Ultra Cover Premium Latex Paint, Multi-Purpose, Liquid, Espresso, Satin, 1 qt, Composition: Dipropylene Glycol Monobutyl Ether, Carbon Black, Coverage: 35 - 70 sq-ft/qt, Curing Time: 30 min to Touch, 1 hr to Handle, 2 - 4 hr to Recoat at 70 - 80 deg F And 50% Relative Humidity, 50 - 90 deg F Application, >200 deg F Flash Point, 190 g/L VOC, 1.076 Specific Gravity, Solvent Odor, Applicable Materials: Metal, Wood, Plaster, Masonry and Unglazed Ceramic, Application Method: Synthetic Brush, Resists: Chip and FadePainter's Touch® Ultra Cover 242018 Premium Latex Paint, 1 qt, Espresso, Satin, 35 - 70 sq-ft/qt Coverage
Rust-Oleum Painter’s Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish that lasts longer than ordinary paints. Apply to wood, metal, plaster, masonry or unglazed ceramic. Durable formula resists chipping and fading. High-quality, high-solids formula, covers faster, hides better, goes further and lasts longer than other general-purpose paints Offers widest color selection in brush form Standard/Approvals: U.S. Federal Regulations Application: Indoor/Outdoor Use
2 per case
Technical Data Sheet
Material Safety Data Sheet
Rust-Oleum Painter’s Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish that lasts longer than ordinary paints. Apply to wood, metal, plaster, masonry or unglazed ceramic. Durable formula resists chipping and fading. High-quality, high-solids formula, covers faster, hides better, goes further and lasts longer than other general-purpose paints Offers widest color selection in brush form Standard/Approvals: U.S. Federal Regulations Application: Indoor/Outdoor Use
2 per case
Technical Data Sheet
Material Safety Data Sheet
Extra Information
Weight:
2.53 LBS
Color:
Espresso
Application Method:
Synthetic Brush
Nominal Capacity:
1 qt
Coverage:
35 - 70 sq-ft/qt
Form:
Liquid
Specific Gravity:
1.076
Applicable Materials:
Metal, Wood, Plaster, Masonry and Unglazed Ceramic
Flash Point:
>200 deg F
Type:
Multi-Purpose
Curing Time:
30 min to Touch, 1 hr to Handle, 2 - 4 hr to Recoat at 70 - 80 deg F And 50% Relative Humidity
Composition:
Dipropylene Glycol Monobutyl Ether, Carbon Black
Finish:
Satin
VOC Content:
190 g/L
Resists:
Chip and Fade
Odor/Scent:
Solvent
Temperature Rating:
50 - 90 deg F Application
