Description
Bonds paint to hard-to-paint surfaces. Excellent wet adhesion, low odor, sandable, soap and water clean-up, non-flammable. Primes aluminum, steel, galvanized metals, tile, porcelain, Formica, glass and old glossy paint. Covers 450 sq ft per gallon.UMA® 11051 Water Based Acrylic Bonder and Primer/Sealer, 1 gal Pail, White, Gloss, 450 sq-ft/gal Coverage
XIM Advanced Technology UMA White is a high performance water-based Bonder that has both primer and adhesive-like properties. It provides excellent adhesion and wet adhesion to “Hard-to-Paint” surfaces, even when wet. Sanding may not be necessary for most clean and dull paintable surfaces, but sanding or dulling the surface is required for maximum adhesion, specifically on surfaces such as tile, porcelain and glazed block. UMA can be used for both indoor and outdoor applications, and can be used with Oil/Alkyd, Latex, Urethane, Epoxy and Lacquer top coats Excellent Wet Adhesion Low Odor Sandable Excellent Leveling Use With Industrial Grade Top Coats Alkyds, Acrylics, Epoxies, Urethanes, Lacquers Non-Flammable Primes and Seals helps Prevent Flaking, Blistering, Peeling Bonds Paint Standard/Approvals: LEED Certified And OSHA 29CFR 1910.1200 Application: Interior/Exterior Use
2 per case
Technical Data Sheet
Safety Data Sheet
XIM Advanced Technology UMA White is a high performance water-based Bonder that has both primer and adhesive-like properties. It provides excellent adhesion and wet adhesion to “Hard-to-Paint” surfaces, even when wet. Sanding may not be necessary for most clean and dull paintable surfaces, but sanding or dulling the surface is required for maximum adhesion, specifically on surfaces such as tile, porcelain and glazed block. UMA can be used for both indoor and outdoor applications, and can be used with Oil/Alkyd, Latex, Urethane, Epoxy and Lacquer top coats Excellent Wet Adhesion Low Odor Sandable Excellent Leveling Use With Industrial Grade Top Coats Alkyds, Acrylics, Epoxies, Urethanes, Lacquers Non-Flammable Primes and Seals helps Prevent Flaking, Blistering, Peeling Bonds Paint Standard/Approvals: LEED Certified And OSHA 29CFR 1910.1200 Application: Interior/Exterior Use
2 per case
Technical Data Sheet
Safety Data Sheet
Extra Information
Weight:
11.25 LBS
Coverage:
450 sq-ft/gal
Temperature Rating:
35 - 100 deg F Application
Application Method:
Brush, Roller, Spray
Curing Time:
30 - 45 min to Touch, 3 hr to Top Coat, 7 - 10 day to Dry Hard at 77 deg F and 50% Relative Humidity
VOC Content:
Finish:
Gloss
Applicable Materials:
Wood, Metals, Plaster, Hardboard, Most Plastics, Fiberglass, Formica, Tile, Porcelain, Glazed Block, Glass
Odor/Scent:
Sweet
Resists:
Blister, Flaking And Peel
Form:
Liquid
Viscosity:
85 +/- 5 Krebs Units
Composition:
N-Methyl-2-Pyrrolidinone, Propylene Glycol, Calcium Carbonate, Crystalline Silica, Anhydrous Aluminum Silicate, Magnesium Silicate Hydrate, Titanium Dioxide
Nominal Capacity:
1 gal
Color:
White
Type:
Water Based
Packing Type:
Pail
Flash Point:
>200 deg F
