Description
A low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, concrete swimming pools and foundation. No pre-mixing or pre-wetting necessary.Drylok® Latex Base Masonry Waterproofer, 1 gal Container, White, 75 - 100 sq-ft/gal Coverage, Typical Amine Odor
Latex base drylok® masonry waterproofer is a low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundation. No pre-mixing or pre-wetting necessary. Ready mixed – Low-odor Formula Withstands 1 pounds of hydrostatic pressure, greater than a wall of water 22 feet high Breathable film – does not trap moisture in masonry Clean up with soap and water Standard/Approvals: NIOSH Approved Application: Waterproofing All Interior, Exterior, Cinder and Concrete Blocks, Stucco and Brick, Retaining Walls, Fish Ponds
2 per case
Safety Data Sheet
Technical Data Sheet
Latex base drylok® masonry waterproofer is a low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundation. No pre-mixing or pre-wetting necessary. Ready mixed – Low-odor Formula Withstands 1 pounds of hydrostatic pressure, greater than a wall of water 22 feet high Breathable film – does not trap moisture in masonry Clean up with soap and water Standard/Approvals: NIOSH Approved Application: Waterproofing All Interior, Exterior, Cinder and Concrete Blocks, Stucco and Brick, Retaining Walls, Fish Ponds
2 per case
Safety Data Sheet
Technical Data Sheet
Extra Information
Weight:
14.00 LBS
Viscosity:
120 - 130 Krebs Units at 77 deg F
Resists:
Hydrostatic Pressure and Wind Driven Rain
Temperature Rating:
Warranty:
10 Years
Type:
Latex Based
pH Range:
9.5 - 9.9 pH
VOC Content:
100 g/L
Odor/Scent:
Typical Amine
Application Method:
Nylon Bristle Brush, Roller or Spray
Specific Gravity:
1.5
Color:
White
Nominal Capacity:
1 gal
Curing Time:
30 min to Touch and 3 hr to Recoat, 24 hr to Top coat with latex paint
Additives:
Water, Diethylene Glycol Mono-methyl Ether, Dibenzoate Ester Mixture, Styrene Acrylic Resin, Titanium Dioxide
Coverage:
75 - 100 sq-ft/gal
Packing Type:
Container
