Description
For exotic hardwoods like teak, rosewood and mahogany. Even coverage, no brush marks. UV-resistance for indoor an outdoor use. Will not crack, chip or peel. Excellent for marine use above the water line.Watco® Teak Oil Finish, 1 gal, 560 - 575 sq-ft/gal Coverage, 120 deg F Flash Point, Solvent Like Odor
Features:
* Watco Teak Oil is specifically formulated to provide an Outstanding UV and moisture resistant finish for dense woods such as teak, rosewood or mahogany
* Watco Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish
* Watco Teak Oil protects wood from within and will not chip, peel or wear away
* Use to treat outdoor or indoor furniture and marine surfaces (above the water line) such as wood boat decks, cabinets and rails WATCO® Teak Oil is specifically formulated for dense woods such as teak, rosewood or mahogany WATCO® Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish It takes less than an hour to treat your wood with WATCO® Teak Oil - simply brush or wipe on and wipe off WATCO® Teak Oil is the choice of fine woodworkers and novices alike Outstanding UV and moisture resistant finish Great for marine use above the water line Easy application and maintenance Application: Wood Boat Decks, Cabinets and Rails
Specifications:
Coverage: 560 - 575 sq-ft/gal | Flash Point: 120 deg F | Odor/Scent: Solvent Like | Applicable Materials: Wood | VOC Content: 450 g/L | Additives: Naphtha, Petroleum, Hydrotreated Light, Stoddard Solvent, Solvent Naptha, Light Aromatic | Color: Clear | Resists: UV and moisture | Application Method: Roller | Form: Liquid | Temperature Rating: 55 - 90 deg F Air and Surface | Specific Gravity: 0.862 | Nominal Capacity: 1 gal | Curing Time: 8 hr to Tack Free, 10 hr to Handle, 30 min Recoat at 70 - 80 deg F and 50% Relative Humidity
Warnings:
Prop 65: WARNING WARNING: Cancer and Reproductive Harm - For more information, go to www.P65Warnings.ca.gov .
