Description
Cetol Log & Siding is a high-performance translucent satin finish for exterior vertical wood surfaces. This alkyd high solids formulation offers optimum protection and a premium look in just two coats. The high solids alkyd resin used in Cetol Log & Siding is another example of Sikkens' commitment to providing superior quality wood coatings.Cetol® Log and Siding Log and Siding Translucent Satin Wood Finish, 1 gal, Cedar, Satin, 136.4 deg F Flash Point
Cetol log and siding is a high-performance translucent satin finish for exterior vertical wood surfaces. This alkyd high solids formulation offers optimum protection and a premium look in just two coats Creates a durable surface barrier to prevent weathering Allows natural characteristics and grain of wood to show through Minimizes cracking due to expansion and contraction of wood Standard/Approvals: OSHA 29CFR191.12 Application: Exterior Wood Siding, Logs and Trim
4 per case
Safety Data Sheet
Technical Data Sheet
Cetol log and siding is a high-performance translucent satin finish for exterior vertical wood surfaces. This alkyd high solids formulation offers optimum protection and a premium look in just two coats Creates a durable surface barrier to prevent weathering Allows natural characteristics and grain of wood to show through Minimizes cracking due to expansion and contraction of wood Standard/Approvals: OSHA 29CFR191.12 Application: Exterior Wood Siding, Logs and Trim
4 per case
Safety Data Sheet
Technical Data Sheet
Extra Information
Weight:
9.09 LBS
Type:
Log and Siding
Coverage:
150 - 225 sq-ft/gal (Rough and Weathered Surface), 300 - 400 sq-ft/gal (Smooth Surface)
Applicable Materials:
Wood
Nominal Capacity:
1 gal
Temperature Rating:
50 - 90 deg F
Flash Point:
136.4 deg F
Viscosity:
170 cps
Additives:
Alkyd Resin, N.o.s. (drying Oil), Distillates (petroleum), Hydrotreated Light, Solvent Naphtha (petroleum), Medium Aliph
Form:
Liquid
Application Method:
Natural Bristle Brush, Roller or Airless Sprayer
Color:
Cedar
VOC Content:
350 g/L
Specific Gravity:
0.96
Curing Time:
6 hr to Touch and 24 hr to Recoat at 77 deg F and 50% Relative Humidity
Finish:
Satin
