Description
Unique fish-oil-based formula, penetrates rust to bare metal, to drive out corrosive air and moisture that other primers leave behind. Bonds tightly to rust to form a surface that topcoats can adhere to.Stops Rust® 7769730 Rusty Metal Primer, 0.5 pt, Rusty, Flat, 80 - 110 sq-ft/qt Coverage, 104 deg F Flash
Rust-Oleum® Stops Rust® Primers provide a sound base for application of Stops Rust® enamels on heavily rusted steel. Primers provide twice the rust prevention than using enamels alone. The use of primers promotes topcoat adhesion and helps prevent chipping, cracking and peeling. Use of Stops Rust primers eliminates the need for multiple coats of enamel finish. Not for use of galvanized steel. Standard/Approvals: Canadian WHMIS Class And U.S. Federal Regulations Application: Indoor/Outdoor Use
6 per case
Technical Data Sheet
Material Safety Data Sheet
Rust-Oleum® Stops Rust® Primers provide a sound base for application of Stops Rust® enamels on heavily rusted steel. Primers provide twice the rust prevention than using enamels alone. The use of primers promotes topcoat adhesion and helps prevent chipping, cracking and peeling. Use of Stops Rust primers eliminates the need for multiple coats of enamel finish. Not for use of galvanized steel. Standard/Approvals: Canadian WHMIS Class And U.S. Federal Regulations Application: Indoor/Outdoor Use
6 per case
Technical Data Sheet
Material Safety Data Sheet
Extra Information
Weight:
0.67 LBS
Flash Point:
104 deg F
Composition:
Mineral Spirits, Magnesium Silicate, Calcium Metasilicate, Xylene, Ethylbenzene
Color:
Rusty
Form:
Liquid
Coverage:
80 - 110 sq-ft/qt
Specific Gravity:
1.444
Temperature Rating:
50 - 90 deg F
Resists:
Chip, Crack and Peel
Odor/Scent:
Mild
Nominal Capacity:
0.5 pt
Finish:
Flat
Applicable Materials:
Metal
Application Method:
Brush, Roller/Spray Gun
VOC Content:
Curing Time:
2 - 4 hr to Tack- Free, 5 - 9 hr to Handle, 24 hr to Recoat at 70 deg F and 50% Relative Humidity
