Description
Painter's Touch® Ultra Cover Premium Latex Paint, Multi-Purpose, Liquid, Nutmeg, Satin, 0.5 pt, Composition: Titanium Dioxide, Limestone, Dipropylene Glycol Monobutyl Ether, Yellow Iron Oxide, Coverage: 35 - 70 sq-ft/qt, Curing Time: 30 min to Touch, 1 hr to Handle, 2 - 4 hr to Recoat at 70 - 80 deg F And 50% Relative Humidity, 50 - 90 deg F Application, 51 deg F Flash Point, 236 g/L VOC, 1.128 Specific Gravity, Solvent Odor, Applicable Materials: Metal, Wood, Plaster, Masonry and Unglazed Ceramic, Application Method: Synthetic Brush, Resists: Chip and FadePainter's Touch® Ultra Cover 240290 Premium Latex Paint, 0.5 pt, Nutmeg, Satin, 35 - 70 sq-ft/qt Coverage
Rust-Oleum Painter’s Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish that lasts longer than ordinary paints. Apply to wood, metal, plaster, masonry or unglazed ceramic. Durable formula resists chipping and fading. High-quality, high-solids formula, covers faster, hides better, goes further and lasts longer than other general-purpose paints Offers widest color selection in brush form Standard/Approvals: U.S. Federal Regulations Application: Indoor/Outdoor Use
6 per case
Technical Data Sheet
Material Safety Data Sheet
Rust-Oleum Painter’s Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish that lasts longer than ordinary paints. Apply to wood, metal, plaster, masonry or unglazed ceramic. Durable formula resists chipping and fading. High-quality, high-solids formula, covers faster, hides better, goes further and lasts longer than other general-purpose paints Offers widest color selection in brush form Standard/Approvals: U.S. Federal Regulations Application: Indoor/Outdoor Use
6 per case
Technical Data Sheet
Material Safety Data Sheet
Extra Information
Weight:
0.67 LBS
Composition:
Titanium Dioxide, Limestone, Dipropylene Glycol Monobutyl Ether, Yellow Iron Oxide
Specific Gravity:
1.128
Temperature Rating:
50 - 90 deg F Application
Resists:
Chip and Fade
Curing Time:
30 min to Touch, 1 hr to Handle, 2 - 4 hr to Recoat at 70 - 80 deg F And 50% Relative Humidity
Coverage:
35 - 70 sq-ft/qt
Applicable Materials:
Metal, Wood, Plaster, Masonry and Unglazed Ceramic
Odor/Scent:
Solvent
Application Method:
Synthetic Brush
Flash Point:
51 deg F
VOC Content:
236 g/L
Color:
Nutmeg
Finish:
Satin
Type:
Multi-Purpose
Form:
Liquid
Nominal Capacity:
0.5 pt
