MULTI-SURFACE ALKALINE CLEANER / PREMIUM CONCRETE CLEANER

• Premium Concrete Cleaner
• Removes Oil Stains

• Brushless Oxidation Removal

• Highly Concentrated
• Free-Rinsing

View List
SKU: XX 22531 Category:

Description

Pro Cleanse BC is a multi-surface alkaline cleaner / degreaser that is designed to
deep clean concrete, brick, lime stone, granite, EIFS, vinyl siding, shingles, awnings and
fiberglass. When used on exterior surfaces, it will remove oxidation and other unwanted
soils without brushing.
Pro Cleanse BC is most effective as an alkaline building restoration and concrete
cleaner, and is perfect for use on driveways, dumpster pads, restaurant drive-throughs,
and gas station surfaces. When used on concrete, Pro Cleanse BC will remove carbon,
oil, tire and other stains. It will brighten the concrete following removal of soils, giving a
fresh look. Pair with Pro Restore 21 for full restoration of masonry surfaces. Pro Cleanse
BC can be used with a pressure washer, brush or low-pressure sprayer application
using either hot or cold water. Protect adjacent and surrounding surfaces not intended
to be cleaned.

DIRECTION FOR USE:

Pro Cleanse BC does not mix with bleach. Do not allow product to dry on a hot surface. Water
pretreatment is generally not necessary. Test a small surface prior to cleaning to determine
compatibility before broad based use. Always test chemical in an “out-of-the-way” area. Allow
surface to dry thoroughly before evaluating final appearance and results.
For Brushless Cleaning: Use Pro Cleanse BC with two quick applications, which should
lead to complete soil release. For brushless rinsing use no less than 1,000 psi. Craftsmanship
determines the appropriate pressures for rinsing. When cleaning with pressure washers, set
the metering valve at desired dilution rate, and apply cleaning solution from the bottom up on a
dry surface. Always detail clean from the bottom up and rinse from the top down.
Suggested Dilutions
Dilutions will vary based on the severity of the stain and type of surface. With hot water, product
can be diluted further than with cold water.
Heavy oil stains, stained wood – 1:1 to 1:2
Medium soil, lighter oil stains – 1:3 to 1:10
Light soil / general degreasing – 1:11 to 1:20
Coverage rates will vary from 100 – 250 sq. ft. per gallon depending on the surface porosity,
texture and severity of staining.

 

Product Size
Code Available Weight
22531-01 4×1 Gallon Case 40 lbs.
22531-05 5 Gallon Pail 50 lbs.
22531-55 55 Gallon Drum 565 lbs.